The popularity of gender reveal car tire burnouts is on the rise across the globe. As more and more couples are looking for innovative ways to reveal the gender of their baby, gender reveal burnouts are becoming a popular alternative idea to announce the gender of the baby to the world.
The gender reveal burnout uses pink or blue plumes from the car’s tires to reveal the gender of the baby. A pink smoke denotes females, while a blue smoke denotes males. To achieve a classic burnout, you will need to purchase a gender reveal burnout kits that come with all the required accessories.
How to Do a Burnout
A burnout involves the spinning of the car’s wheels at high speeds to cause a large amount of smoke. The following are some of the ways to perform a gender reveal burnout:
Method 1
- Use a Suitable Car — Not all vehicles can perform burnouts. You will need a vehicle that comes with high horsepower. It is also recommended that you use a new car over an old one. Besides, you will get better results if you are using a manual car, although an automatic can still do. You will also need to use street tires to achieve better results. Street tires come in smoother surfaces that can give out more smoke.
- Engage the First Gear — You should then depress the clutch fully before you rev your car’s engine. Don’t start moving yet. Keep depressing the clutch as you rev the engine even more. You should also engage RPMs up to heat the tires before you let them loose.
- Lock the Handbrake — After you have popped the clutch, the car tires will start spinning very fast. You can then choose to pop it to speed off to enable you to perform a peel out or lock your handbrake or parking brake to spin off your tires and create a burnout smoke.
- Release the Clutch — Once you have released the grip, the tires will spin at high speed to release high amounts of burn out smoke. If you want to stop the burnout, release the accelerator slowly and then free the car brakes.
- Automatic Car — If your car uses automatic transmission, then do the following: Put the transmission into D then hold the footbrake down fully. Then using the throttle pedal, build up the car rev. Once you are ready, release the car’s footbrake to enable it to wheel spin and release large smoke.
Method 2
- Try a Peel Out — Alternatively, you can use a peel out method to achieve the desired burn out. A peel out happens when you spin the wheels on the road before moving. When compared to a burnout, peel outs are much easier to perform. They are also less dangerous and damaging to your car. Most probably, you have experienced a peel out during your normal driving. If you jump off the gas pedal too hard at stoplights; you may end up with an unintended peel out.
Steps You Can Use to Perform the Peel Out
- Engage the car in gear while depressing the clutch
- Then you rev the car to achieve high performance
- Abruptly release the clutch to make a perfect peel out
- Try a Donut — Typically, a donut refers to a circular burnout. If you want to do a donut, then you should look for a large open area. The donut location should be free from other cars, people, animals, or any other thing that you may hit. A donut comes with a lot of risks, including losing control of your car at high speeds.
You should then start by driving in slow circles. Once you are used to the car tracks, increase the speed as you make more circles. Then finally, press the gas pedal hard to enable the rear tires to lose traction. As you do so, hold the when in the same position to achieve a spinning outperformance.
- Rollback Burnout — A rollback burnout is a standard burnout that is performed on a sloping or hilly area. A rollback burnout is suitable for underpowered cars. With such vehicles, the backward movement will help achieve after-burn traction.
Do the following to obtain a rollback burnout:
- Locate a hill and drive your car up to its peak.
- Then engage the car in first gear while you depress the clutch fully. You should then let your car roll backwards gently.
- Then afterwards, press the gas pedal to achieve high performance.
- Abruptly pop the clutch to let your car jump into the first gear. You will then perform an effective rollback burnout upon taking off.
- Using a Line Locker — A line locker is a device that has been uniquely designed to modify a car to enable the brake pedal to work on the front brakes only. With a line locker, you get extra buttons in your seat to have better control of the car brakes. Once you have installed a line locker, do the following to achieve a burnout:
Step on the brakes hard and push the line lock button. Once you release the brakes, the front brakes will be working while the back brakes are disengaged. Because the rear brakes have been disconnected, the back wheels will be free to spin, burn and produce a lot of smoke. If you want to move forward, you can release the lock button and the front brakes. Your car will then move forward at high speeds while producing a burnout smoke. However, the line locker is illegal for use in most states. You should also exercise a lot of caution before using the device.
How to Get a Colored Burnout That Reveals the Gender of the Baby
You need to introduce unique coloring compounds into your car’s raw rubber tires. The compounds vaporize in a colored plume at high temperatures created during a burnout. The burn out temperatures should be at least 400 Celsius to enable the burnout. Depending on the gender of your baby, you can choose to use pink or blue coloring compounds. A pink plume reveals the baby’s gender as female, while a blue one reveals the baby’s gender to be male.
Frequently Asked Questions
Can a gender reveal burnout damage my car?
Car burnouts come with various risks. You risk damaging your car if you subject it to prolonged burnout. When a car is subjected to long burnouts, it tends to overheat. If you are using an automatic car, holding the brake for too long is not advisable as it will wear it off fast. A twenty-second car burnout will wear off your tires down by 20,000 miles.
Can I do a gender reveal burnout using an automatic car?
Yes. It is possible to perform a gender reveal burnout using an automatic car. What determines the quality of your burnout are the tire quality and your car’s horsepower. If you are using an automatic car to perform a burnout, then do the following: Put the transmission into D. then hold the footbrake down fully. Then using the throttle pedal, build up the car rev. Once you are ready, release the car’s footbrake to enable it to wheel spin.
Can I do a gender reveal burnout using an FWD car?
It is possible to achieve a quality burnout using a four-wheel-drive car. You need to press the clutch fully before you rev your car to achieve high performance. Put the car in first gear then pop the clutch to let the wheel spin at high speed. This way, you will achieve the desired burnout.
How do I spin a stationary car’s tires?
If the stationary car uses manual transmission, you should rev it to 3500 rpm while you hold the clutch to the floor. You should then release the clutch suddenly to achieve a spin. But if the stationary car uses automatic transmission, you should hold your foot firmly on the brakes while you continuously rev your engine.
What are the factors that determine my car’s suitability for a burnout?
Several factors will determine whether your car can perform a perfect burnout or not. Some of the factors you should consider include the weight of the vehicle, whether the car is an AWD, RWD, or FWD. You should also consider your car’s tire compound.
Can a car with 50 horsepower do a burnout?
A 50 horsepower car can perform a burnout. However, you should consider other factors such as the car weight, types of tires, and ten car torque before you decide on whether to perform a burnout or not.
Are car burnouts legal?
Although car burnouts are becoming popular in gender reveal party events, and in informal street racing, it is still illegal in most countries. Car burnouts can lead to severe accidents and road damages.
Gender reveal burnouts are fantastic. In fact, more and more couples are resorting to car burnouts to reveal the gender of their baby. But, before you decide on this method, you should consider a lot of things, including its legality and safety.